|
First, let's get our terms straight so we're on the same track
|
|
If your bike has three speeds then telling the gears apart is easy, because
there's only one shifter and it's labelled 1-2-3. You can skip the rest
of this section and go on to the next one.
|
|
But if your bike has 12 or more speeds then it's just a little bit trickier,
because you have two shifters....Let's say you have an 18-speed bike.
Your left shifter will be labelled 1-2-3, and your right shifter will be
labelled 1-2-3-4-5-6. This means that for each number on the left, you get
six different speeds on the right, for a total of 18. Here's how it works:
|
|
Shifting puts the chain on a different ring. The left shifter changes the ring
where the pedals are. The smallest ring is 1, the middle ring is 2, and the
biggest ring is 3. When you downshift with your left shifter,
you're moving to a smaller ring.
|
|
The right shifter changes the ring on the rear wheel. This is opposite of
the front set: On the rear wheel the biggest ring is 1, and the largest ring is 6.
|
|
You don't have to worry about the ring sizes if you don't want to, you can just
look at the numbers on the shifter. You can downshift with either shifter, moving
it from a higher number to a smaller number. You get a bigger change when you
shift with the left-hand shifter than when you shift with the right-hand shifter.
|
|
Now that you know what the terms mean, let's see how to use our gears
|
|
Here's pretty much all you need to know about shifting gears:
|
| • |
If you're going uphill and it's too difficult, shift down.
|
| • |
If your legs are spinning the pedals way too fast (it's too "easy") then shift up.
|
|
Here it is with more detail:
|
| • |
Let's say you're on a three-speed bike, in second speed. You start to go up a hill,
and suddenly your legs can't spin the pedals as fast. You're barely turning the pedals,
pushing hard on them, and you're going so slowly you think you might fall over.
The solution? Downshift to first gear.
|
| • |
How does that solve the problem? First gear moves you a shorter distance for
each spin of the pedals, which makes it easier to pedal.
|
| • |
Now let's say you've reached the top of the hill, and you start going downhill slightly.
Soon you find there's no resistance in the pedals -- you can spin them as fast as you
want and you're not really getting anywhere. Solution? Upshift back to 2, and if it's
still too easy, then upshift to 3.
|
| • |
This works because the higher gears move you farther for each spin of the pedals,
making you do more "work", and making it less "easy".
|
|
So you've learned the basics: Uphill = shift down, Downhill = shift up. But you
have an 18-speed bike and you're wondering which shifter to use, the
left one or the right one?
|
|
The answer depends on how much change you need. If you need a big change,
use your left shifter. If you need a small change, use the right one.
As you ride you'll get a feel for whether you need a big change or a small change.
|
|
Another thing: Try to keep the chain in a sort-of straight line between the
front and rear sets, rather than going at an angle from left to right. For
example, in the very lowest gear the chain will be all the way on the left
on both sets. In the very highest gear the chain will be all the way on the right.
What you don't want to do is to use the left-hand ring in the front and the
right-hand ring in the back, which makes the chain go diagonally -- that stretches
the chain and wears it out. You also don't want to use the right-hand ring in the
front and the left-hand ring in the back. Same thing.
|
|
If you're in the easiest gear (left-hand on both rings) and you need to upshift,
and you've moved the chain on the rear set to the middle, and that's not
enough and you still need to upshift, don't keep shifting the rear set.
Instead, shift the front set from the left to the middle (1 to 2).
That keeps your chain nice and straight.
|
|
Let's have a look at our gearing chart. The green boxes are the combinations
you'll use, and the grey ones are the combos you'll avoid.
|
|
#L/H Chainring
|
#Middle Chainring
|
#R/H Chainring
|
|
1
|
2
|
3
|
4
|
5
|
6
|
Right-Hand Shifter
(Rear Ring Set)
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
Right-Hand Shifter
(Rear Ring Set)
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
Right-Hand Shifter
(Rear Ring Set)
|
|
|
|
So yes, you won't use every gear available to you. You're not supposed to.
When you get an 24-speed bike vs. an 18-speed bike, the point isn't really
that you get more gears to use, it's to give you smoother and better gear changing -
smaller steps between the cogs on the rear set.
|
|
I hope this helps, and have fun with your gearing!
|
Cycle King Branches
.gif)
